Lokprogrammer

We have contacted Trading Standards for advice regarding the supplying of a 3-pin British Plug with imported goods.

For your safety we have chosen a fused 3-pin Euro converter.  This simply fits over the 2-Pin plug and is safely secured with screws.

We have opted to supply these pre fitted Free of charge with EcoS and LokProgrammer to both trade and the general public.

If you have previously purchased any of the above from ourselves and would like an adapter, please contact us.  (proof of purchase will be required).

Note: SWD sound projects are not included with this product.

Sound

With the LokProgrammer you can erase the sound data of any LokSound decoder as many times as you wish, and replace it with a different sound. To this end we offer on our homepage more than 200 different, fully matching sounds of various prototypes and locos for downloading on your computer. Also you can edit just parts of a sound project: You don’t like the decoder’s whistle? Just replace it with one of the many others. Suitable sources beside those offered by us, are in Windows *.wav format available. Sound – even voice or music is no problem for our decoders. With the LokProgrammer’s aid you use the entire flexibility and functionality offered by LokSound decoders.

 Programming

By the same token, all other ESU decoders profit from the LokProgrammer’s versatility; no matter if DCC, Multiprotocol - or mfx decoder. With its help it’s possible to edit all parameters of the particular decoder simply and conveniently. The available options depend on the kind of decoder. Beside addresses and acceleration - and deceleration settings, this concerns above all the allotment of function keys (function mapping), the allocation of special effects to the individual outputs, or the lamp brightness. The LokProgrammer can also help when optimizing back EMF parameters or the loadable speed table. All options can be programmed very conveniently: There is no tedious punching-in of CV-numbers at the Digital station anymore.

 Hook up

It’s this simple: The LokProgrammer is a small programming box, which is wired between the PC and a programming track. To connect it you need either a vacant serial interface, or you use the included USB‑adapter cable (works with Windows 2000 or Windows XP). For power we include a 500 mA power supply. If your needs are greater (e.g. for gauge I engines), you can also use a conventional model railroad transformer.

 Copyright © South West Digital Ltd 2005-2008 applies to sound projects that have been created by South West Digital Ltd  all rights reserved.